TEMPERATURE CONTROL UNIT

General Information : 'LE Series Water Units

Model shown : SK-1035LE mold temperature control unit with LE Series instrument, 10KW heater and 3/4 HP pump.

Sentra Series temperature controllers are fluid circulating units designed to control process application temperatures between 30°F to 250°F* for Heating and Cooling.

The Sentra LE Series offers
• AVT™ Modulating Cooling Valve for
  precise straight line temperature control.
• LE Series Microprocessor Instrument for
  easy-to-use operation.

• HEATING CAPACITY:
   • 10 - 34 KW

• PROCESS PUMP HP:
   • ¾ - 7.5 HP at 35 - 100 GPM

• DIMENSIONS:
   • 27" x 11" x 16" for units up to
     ¾ to 3 HP
   • 44" x 16" x 24" for units with
     5 or 7.5 HP pump (HxWxD)

• WARRANTIES:
   • Lifetime pump seal
   • 4 year control instrument
   • 2 year cooling valve
   • 2 year mechanical

CONTROL INSTRUMENT:
The 'LE' Series control instrument offers large digital and easy to read temperature displays for "To Process" and "Setpoint" and "From Process". Digital Setpoint selection is offered. Machine function and diagnostic indicators keep the operator current on machine operation.

SERVICE: for help with installation, operation and maintenance, experienced factory service technicians are available by phone or in person. Call 317-887-0729 for more information. A nationwide network of independent service contractors are in place for local service if needed.

All types of INDUSTRIAL APPLICATIONS can benefit from using the SK Series temperature control units. These include most Plastic molding processes, Die casting, HVAC, Dry Cleaning, Food Service and others.

* Note: Standard temperature Range for LE Series mold temperature control units is approximately 10°F above the cooling water supply temperature to 250°F.