TEMPERATURE CONTROL UNIT

General Information : Air-Cooled Oil Unit

Model shown : RK-1230HC temperature control with 12KW heater and 1 HP pump and Air-Cooled cooling circuit.

SERVICE: for help with installation, operation and maintenance, experienced factory service technicians are available by phone or in person. Call 317-887-0729 for more information. A nationwide network of independent service contractors are in place for local service if needed.

Service Note:
Easy Cures for Common Complaints about Hot-Oil Units. A helpful article from Plastics Technology to keep your hot oil unit operating at peak efficiency.

Regal Series temperature controllers are fluid circulating units that control application temperatures between 100°F to 500°F for process Heating and/or Cooling.

All types of INDUSTRIAL APPLICATIONS can benefit from using the RK Series process liquid chiller. These include most Plastic molding processes, Diecasting, HVAC, Dry Cleaning, Food Service and others.

All RK Series Air-Cooled models feature a high volume centrifugal pump with air-cooled pump seal.

Models with the optional cooling circuit are equipped with a high temperature air-cooled heat exchanger to provide process cooling. When required, a valve opens introducing cooled fluid into the process while the fan exhausts the heat to the environment. The fan runs continuously providing a cool fluid reserve in the heat exchanger for rapid cooling on demand.

Air-Cooled Units Feature:
• Lower cost to install ... no water
   plumbing required.
• Longer heat exchanger life ... no
   thermal shock typical of water-cooled
   units
• Less pump maintenance ... air-cooled
   design eliminates scaling in cavity of
   typical models using water-cooled seal.
• Less heat exchanger maintenance ...
   air-cooled design eliminates scaling in
   heat exchanger typical of models using
   water-cooled heat exchangers.

The Regal Series offers
• Low watt density heater for long
  service life.
• Water-cooled high flow centrifugal pump
• Heating only units or heating & cooling
  units
• Choice of 3 control instruments to
  match your process requirements.

• HEATING CAPACITY:
   • 12 - 24 KW

• PROCESS PUMP HP:
   • 1 - 3 HP

• COOLING:
   • Air-cooled via heat exchanger

• DIMENSIONS:
   • 44” x 16” x 24” (HxWxD)

• WARRANTIES:
   • 1 Year parts and labor

CONTROL INSTRUMENTS:
Three control instruments to choose from! Select the right instrument for your process application from the basic control features of the 400° instrument, the mid-range LE instrument for temperature display and basic machine function and diagnostics, or the HE instrument for advance temperature monitoring and diagnostics.